ICOM 297400 사용자 설명서
7
2
BASIC OPERATION
0
2
■
Frequency setting example
The following example shows to how to set 126.40 MHz as the standby frequency and then exchange it with the active fre-
quency indicator.
quency indicator.
The active frequency and the standby
frequenies are exchanged.
frequenies are exchanged.
Previously used frequencies appear.
Rotate the large tuning dial to change
the standby frequency in MHz steps.
the standby frequency in MHz steps.
Rotate the small tuning dial to change
the standby frequency in kHz steps.
the standby frequency in kHz steps.
121.80
5
134.80
RX
126.80
5
134.80
RX
126.40
5
134.80
RX
134.80
5
126.40
RX
q
Rotate
[O-DIAL] clockwise to
select “126” MHz.
w
Rotate
[DIAL] counterclockwise
to select “400” kHz.
e
Push
[�].
NOTE: DO NOT hold down [�]
continuously. Otherwise the sta-
ndby frequency disappears. If this
happens, hold down
continuously. Otherwise the sta-
ndby frequency disappears. If this
happens, hold down
[�] until the
standy frequency reappears.
STEP DISPLAY NOTE