ICOM 297900 사용자 설명서
7
1
PANEL DESCRIPTION
D For Digital mode operation only
TALKGROUP KEY
➥ Push to enter the talkgroup ID code selection mode direct-
➥ Push to enter the talkgroup ID code selection mode direct-
ly. Then select the desired talkgroup ID code using [CH
Up]/[CH Down]. (p. 12)
Up]/[CH Down]. (p. 12)
➥ Push to stop the beep emission when receiving a matched
talkgroup ID code.
TX STATUS KEY
Push to enter the Status message selection mode directly.
Then select the desired Status message using [CH Up]/[CH
Down]. (p. 12)
Push to enter the Status message selection mode directly.
Then select the desired Status message using [CH Up]/[CH
Down]. (p. 12)
TONE/RAN CH SELECT KEY
➥ While in the analog mode operation, push to select the
➥ While in the analog mode operation, push to select the
continuous tone channel using [CH Up] or [CH Down] to
change the tone frequency/code setting.
change the tone frequency/code setting.
➥ While in the digital mode operation, push to select the RAN
channel using [CH Up] or [CH Down] to change the RAN
code setting.
code setting.
➥ While in the mixed (digital and analog) mode operation,
push to select the continuous tone channel using [CH Up]
or [CH Down] to change the tone frequency/code setting.
Then push this key to enter the setting. After that, the RAN
channel selection screen appears. Select the RAN channel
using [CH Up] or [CH Down] to change the RAN code set-
ting. Then push this key to enter the setting.
or [CH Down] to change the tone frequency/code setting.
Then push this key to enter the setting. After that, the RAN
channel selection screen appears. Select the RAN channel
using [CH Up] or [CH Down] to change the RAN code set-
ting. Then push this key to enter the setting.