ICOM 297900 사용자 설명서

i

EXPLICIT DEFINITIONS

RWARNING! NEVER

connect the transceiver to an

AC outlet. This may pose a fire hazard or result in an electric
shock.

connect the transceiver to a power source of more

than 16 V DC such as a 24 V battery. This connection will ruin
the transceiver.

cut the DC power cable between the DC plug and

fuse holder. If an incorrect connection is made after cutting,
the transceiver might be damaged.

place the transceiver where normal operation of

the vehicle may be hindered or where it could cause bodily
injury.

allow children to touch the transceiver.

expose the transceiver to rain, snow or any liquids.

the specified microphone only. Other microphones

have different pin assignments and may damage the trans-
ceiver.

use or place the transceiver in areas with tem-

peratures below –30°C (–22°F) or above +60°C (+140°F), or
in areas subject to direct sunlight, such as the dashboard.

PRECAUTIONS

RWARNING

Personal injury, fire hazard or electric shock
may occur.

Equipment damage may occur.

If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.

carefully and com-

pletely before using the transceiver.

This

instruction manual contains important operating instructions
for the IC-F5061 and IC-F5063 VHF MOBILE TRANS-
CEIVERS.

IMPORTANT

Icom, Icom Inc. and the 

logo are registered trademarks of Icom

Incorporated (Japan) in the United states, the United Kingdom, Germany,
France, Spain, Russia and/or other countries.
All other products or brands are registered trademarks or trademarks of their
respective holders.

NOTE: See the operating guide for details of BIIS, MDC
and LTR operation. Ask your dealer for details.