ICOM 301500 사용자 설명서

7

61

N

The transceiver has 201 memory channels including 
2 scan edge channels.
Memory mode is very useful for quickly changing to 
often-used frequencies.

All 201 memory channels are tuneable which means 
the programmed frequency can be tuned temporarily 
with [DIAL], etc., in memory mode.

1–199 

Independent transmit and receive frequencies 
and mode in each memory channel.

Yes

Yes

Yes

P1, P2

One frequency and one mode in each memory 
channel as scan edges for programmed scan.

Yes

Yes

No

N

q  Push 

V/M 

 to select memory mode.

 • 

“

” appears.

w  Rotate [M-CH] to select the desired memory 

channel.

 • 

 

If the RIT control indicator lights red, push 

 

to turn the RIT function OFF. (See below for details)

 • 

 

All memory channels including blank channels can be 
selected.

 • 

 

[UP]/[DN] on the microphone also selects the mem-
ory channels. (The only programmed memory chan-
nels are selectable.)

Channel decreases

Channel increases

RIT control indicator
goes out

 

 When the RIT control indicator lights red, the 
memory channels cannot be selected with rotat-
ing the [M-CH] control because the [M-CH] con-
trol acts as the RIT control. So, push 

 to 

set the [M-CH] control to memory channel control 
(RIT control indicator goes out).

RIT control
indicator

[EXAMPLE]: Selecting memory channel 17.

Push

Appears

Rotate [M-CH]

VFO mode

Memory mode

Channel 17 is selected.