ICOM 301500 사용자 설명서

78

10

SET MODE

This item selects whether the operating mode an-
nounced with the speech synthesizer when 

 is 

pushed.
When “on” is selected, the selected operating mode is 
announced at pushing 

.

on  : Operating model announcement with 

.

oF  : No operating mode announcement with 

.

OFF (default)

This item sets the rate at which channels or frequencies 
are scanned during scan operations.
High and low can be selected.

HI  : Fast scan.
Lo  : Slow scan.

High (default)

This item turns the scan resume function ON or OFF.

on :  

Scan resumes 10 sec. after stopping on a signal (or 
2 sec. after a signal disappears).

oF :  

Scan does not resume after stopping on a signal.

ON (default)

This item sets the auto tuning step function. When ro-
tating [DIAL] rapidly, the tuning step rate adapts as se-
lected.
There are 2 type of auto tuning steps: HI (Fastest) and 
Lo (Faster).

HI :  

Approx. 5 times faster when the tuning step is set to 
1 kHz or smaller steps; approx. 2 times faster when 
the tuning step is set to 5 kHz or larger steps.

Lo  : Approx. 2 times faster
oF  : Auto tuning step is turned OFF.

High (default)

This item turns the ¼-speed tuning function ON or OFF 
in CW, RTTY and SSB data modes.

on :  

The ¼-speed tuning function ON for critical tuning. 
While operating in CW/RTTY/SSB data/AM data, 
the dial sensitivity is reduced to ¼ of normal.

oF :  

The ¼-speed tuning function OFF.

  NOTE: This function is only available when the pro-

grammable tuning step is OFF (p. 26).

OFF (default)