ICOM 306302 사용자 설명서
1
PANEL DESCRIPTION
2001 NEW
1
q
INTERNAL SPEAKER
Monitors received signals.
w
VOLUME CONTROL [VOLUME] (p. 7)
Adjusts the audio output level.
e
SELECTOR DIAL [SELECT]
Rotate to adjust the squelch threshold level, select
the operating channel. (Depending on the pre-
programmed condition.)
programmed condition.)
r
POWER INDICATOR [POWER]
➥ Lights green at ‘A’ module's indicator while the
repeater power is turned ON.
When a channel extension module is installed:
➥ Lights green at the selected module indicator
➥ Lights green at the selected module indicator
(‘A’ or ‘B’) while the repeater power is turned
ON.
ON.
➥ Lights orange at the un-selected module indica-
tor (‘A’ or ‘B’) while the repeater power is turned
ON.
ON.
t
TRANSMIT INDICATOR [TX]
Lights red while transmitting.
y
BUSY INDICATOR [BUSY]
Lights green while receiving a signal or when the
noise squelch is open.
About [PWR], [TX] and [BUSY] indicators:
‘A’ and ‘B’ modules indicators are available for
these indications. ‘A’ module's indicator correspond
to the original module, and ‘B’ module's indicator
correspond to an extended module.
to the original module, and ‘B’ module's indicator
correspond to an extended module.
u
MICROPHONE CONNECTOR [MIC]
This 8-pin modular jack accepts the optional micro-
phone.
KEEP the [MIC] connector cover attached to the
repeater when the optional microphone is not
used.
repeater when the optional microphone is not
used.
i
q
q
+8 V DC output (Max. 15 mA)
w
Output port for PC programming
e
NC
r
M PTT (Input port for TX control)
t
Microphone ground
y
Microphone input
u
Ground
i
Input port for PC programming
i
POWER SWITCH [POWER]
➥ Push to turn the repeater power ON.
➥ Push and hold for 3 sec. to turn the repeater
➥ Push and hold for 3 sec. to turn the repeater
power OFF.
When a channel extension module is installed:
➥ While the repeater power is turned ON, push
➥ While the repeater power is turned ON, push
to select the desired module to operate the re-
peater as the base station.
peater as the base station.
• The power indicator of the selected
module
unit
lights green.
o
DEALER-PROGRAMMABLE KEYS
Desired functions can be programmed indepen-
dently by your dealer.
dently by your dealer.
Ask your dealer for details.
• Because these keys are programmable, the functions
of these keys are unique to each unit.
P
0
P
1
P
2
P
3
P
4
q
w
e
i
u
o
Function
display
display
y
t
r
n
Front panel