ICOM 307701 사용자 설명서
9
2
BASIC OPERATION
n
Clock function
The transceiver indicates the current time and date when
[Clock] is pushed. And you can change the indication format
and time/date settings.
[Clock] is pushed. And you can change the indication format
and time/date settings.
When you use the transceiver for the first time, or after
the transceiver has sat unused for a long time, make sure
to check the date and time indication after turning the
power ON. If the time and date are not correct, reset
them. (p.10)
the transceiver has sat unused for a long time, make sure
to check the date and time indication after turning the
power ON. If the time and date are not correct, reset
them. (p.10)
D Time and date indication
q
Push [Clock] to indicate the current time and date on the
LCD.
• When the indication format is set to 12-hour, “AM” or “PM” is
indicated.
• The LCD indication returns to the stand-by mode after 30 sec.
has passed with no operation.
1 2 H R
1 2 : 0 0 P M
Y M D
0 8 - 0 4 - 0 1
The time indication format (12-hour/24-hour)
Time
Date
Date indication format (Y: Year, M: Month, D: Day)
w
Push [Clock] again to return to the stand-by mode.
D Time and date settings
q
Push [Clock] to indicate the current time and date on the
LCD.
1 2 H R
1 2 : 0 0 P M
Y M D
0 8 - 0 4 - 0 1
w
Push and hold [Clock] for 1 sec. to enter the time and date
setting mode.
• The time indication format, “24HR” or “12HR” blinks.
1 2 H R
1 2 : 0 0 P M
Y M D
0 8 - 0 4 - 0 1
e
Push [Clock] to select the desired item to be changed.
r
Push [CH Up] or [CH Down], or rotate [CH Up/Down]* to
set the selected item.
*Simple type only
1 2 H R
0 3 : 0 0 P M
Y M D
0 8 - 0 4 - 0 1