ICOM 325100 사용자 설명서
3
1
PANEL DESCRIPTION
q ANTENNA CONNECTOR [ANT]
Connect a 50
antenna with a PL-259 connector,
through a 50
coaxial cable.
w POWER RECEPTACLE [DC13.8V]
Connect a 13.8 V DC ±15% power source with the
supplied DC power cable.
supplied DC power cable.
NOTE: DO NOT use a cigarette lighter socket as
a power source, when operating in a vehicle. The
plug may cause voltage drops and ignition noise
may be superimposed onto the transmit or receive
audio.
plug may cause voltage drops and ignition noise
may be superimposed onto the transmit or receive
audio.
e SPEAKER JACK [SP]
Connect a 4
speaker here.
• Audio output power is more than 3.5 W.
■ Microphone (HM-133V)
q VFO/LOCK KEY [VFO/LOCK]
➥ Push to select the VFO mode. (p. 5)
➥ Hold down for 1 second to turn the Lock function
ON or OFF. (p. 7)
w PTT SWITCH
➥ Hold down to transmit; release to receive.
➥ Toggles between transmitting and receiving while
the One-Touch PTT function is in use. (p. 11)
e UP/DOWN KEYS [Y] or [Z]
➥ Push either key to change the operating frequen-
cy, memory channel, mode setting, and so on.
(pp. 5, 18, 43)
(pp. 5, 18, 43)
➥ Hold down either key for 1 second to start scan-
ning. (p. 30)
r ACTIVITY INDICATOR
➥ Lights red while any key, except [FUNC]
and
[DTMF-S]
, is pushed, or while transmitting.
➥ Lights orange while the Microphone Keypad Lock
function is activated.
➥ Lights green while the One-Touch PTT function is
in use.
t KEYPAD (p. 4)
➥ Push to activate various functions.
y FUNCTION INDICATOR
y FUNCTION INDICATOR
➥ Lights orange while [FUNC]
is activated—
indicating the secondary function of keys can be
accessed.
accessed.
➥ Lights green when [DTMF-S]
is activated—
DTMF signals can be transmitted using the key-
pad.
pad.
u FUNCTION KEY [FUNC] (p. 4)
i DTMF MEMORY SELECT KEY [DTMF-S] (p. 37)
o FUNCTION KEYS [F-1] or [F-2] (p. 51)
Program and re-call your desired transceiver set-
i DTMF MEMORY SELECT KEY [DTMF-S] (p. 37)
o FUNCTION KEYS [F-1] or [F-2] (p. 51)
Program and re-call your desired transceiver set-
ting.
!0 BANK/OPTION KEY [BANK/OPTION]
➥ Push to select the memory bank option, when in
the memory mode. (p. 24)
➥ Hold down for 1 second to enter the Option Set
mode.
!1 MEMORY/CALL KEY [MR/CALL]
➥ Push to select the memory mode. (p. 18)
➥ Hold down for 1 second to select the Call channel.
(p. 27)
e
w
q
■ Rear panel
q
e
r
r
t
Mic element
y
u
i
o
!0
!1
w