ICOM 325100 사용자 설명서

Vii

QUICK REFERENCE GUIDE

The IC-2300H has a total of 207 memory channels for 
storing often used operating frequencies, repeater set-
tings, and so on. Memories include 6 scan edges and 
1 Call channel. 

1. Setting the frequency
In the VFO mode, set the desired operating frequency, 
repeater, tone and tuning steps, and so on.

2. Selecting the memory channel 
Push [S.MW], and then rotate [DIAL] to select the de-
sired memory channel.
• The “

” icon and memory channel number blink.

3. Writing a memory channel
Hold down [MW] (S.MW) for 1 second to program.
• 3 beeps sound
•  The memory channel number automatically increases 

when continuing to hold down [MW] (S.MW) after pro-
gramming.

Using the HM-133V
q  In the VFO mode, set the desired operating frequen-

cy, offset and direction, tone settings, and so on.

w Push [FUNC] 

 then [MW] 

.

 • 

The 

“

” icon and memory channel number blink.

e  Push [Y] or [Z] to select the desired memory chan-

nel.

r  Push [FUNC] 

 then hold down [MW] 

 for 1 sec-

ond to save the setting.

  • 3 beeps sound
 • 

 

The memory channel number automatically increas-
es when you continuing to hold down [MW] 

 after 

programming.

■  Programming memory channels

[S.MW] (MW)

Push          , 

then