ICOM 375410 사용자 설명서
24
4
RECORDING AND PLAYING BACK
4
201802
201802
BASIC MANUAL
■
Setting the Record operation
You can select to record the received audio from only the main band or both the main and
sub bands.
[MENU] > RX Recorder > Recorder Set >
REC Operation
1. Push [MENU].
2. Select “REC Operation” in the “RX Recorder” menu.
(Rotate [DIAL] to select it, and then push [ENTER].)
3. Select “A/B Separate” or “A/B Link.” (default: A/B Link)
“A/B Separate”: Only audio signal received on the band that is set as MAIN (A or B)
is recorded.
“A/B Link”:
Audio signals received on either or both MAIN and SUB band (Both
A and B) are recorded.
L
Push [CLEAR] to return to the Main screen.
■
Recording
D
Starting recording
z
Push [zREC].
•“Recording started...” is briefly displayed.
TIP:
•“
” is displayed during recording.
•“
” is displayed while recording is paused.
•If a single band display is selected, only the audio
signal received on the band is recorded, even when the
“REC Operation” item is set to “A/B Link.”
•The recording continues until you push [zREC], or the
free space on the microSD card has run out.
•When the recording file’s content reaches 2 GB, the
receiver continues to record, but to a new file.
D
Stopping recording
1. Push [zREC] again.
•A confirmation dialog is displayed.
2. Select “YES,” and then push [ENTER].
•“Recording stopped.” is briefly displayed.
NOTE: Once the recording starts, it will continue even if the receiver is turned OFF and
ON again.
TIP:
As the default setting, the recording is paused while the squelch is closed, and resumes
when a signal is received. But you can set to continue recording even while no signal is
received. (See section 6 of the ADVANCED MANUAL.)
([MENU] > RX Recorder > Recorder Set >
RX REC Condition)
[zREC]