ICOM 375410 사용자 설명서
28
5
MEMORY CHANNELS
5
201802
201802
BASIC MANUAL
■
Writing a new memory channel
A single memory channel stores the frequency, receive mode
and so on, for quick recall.
The following is the basic memory writing procedure.
L
Refer to ADVANCED MANUAL for memory writing details.
L
See Section 3 for the receive frequency or receiving mode
setting procedures.
D
Writing to a blank channel
Example: Writing
“145.000 MHz” in the “FM” mode to a
blank channel in a selected group.
z
Hold down [MW] until 2 beeps sound.
•The contents such as frequency and operating mode are
briefly displayed, then written to a blank channel (45) in the
selected group (00).
D
Writing to a specified channel in a specified group
Example: Writing
“145.100 MHz” in the “FM” mode into channel 01 in group 55.
1. Push [MW].
2. Select “Write to New CH.”
(Rotate [DIAL] to select it, and then push [ENTER].)
3. Push [QUICK].
4. Select “Group Select,” and then push [ENTER].
5. Select group “55,” and then push [ENTER].
6. Rotate [DIAL] to select channel “01.”
•The selected channel blinks.
7. Push [MW].
•The writing confirmation dialog appears.
8. Select “YES.”
•The contents to be written into the channel are briefly displayed, then are written into
channel “01” in group “55.”
[MW]
Contents
to be written
Memory group
to belong