ICOM 382200 사용자 설명서
30
8
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D Sending a Test call
You should avoid testing calls on the exclusive DSC distress
channels and safety calling channels. When you cannot
avoid testing on a distress or safety channel, you should
indicate that these are test calls.
Normally the test call would require no further
communications between the two stations involved.
channels and safety calling channels. When you cannot
avoid testing on a distress or safety channel, you should
indicate that these are test calls.
Normally the test call would require no further
communications between the two stations involved.
1.
Push [◄] or [►] to display
.
2.
Push the software key below
.
•
The “Compose Other” screen is displayed.
L
You can also display the “Compose Other” screen by
selecting the “Compose Other” item on the Menu screen.
3.
Push [▲] or [▼] to select “Test Call,” and then push
[ENT].
[ENT].
•
The “Test Call” screen is displayed.
4.
Select the station to send the
Test call to.
Test call to.
L You can also select “Manual Input”
to manually enter the calling station.
5.
Push the software key below [CALL] to send the Test call.
•
“Transmitting Test Call” is displayed.
L
If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
6. When you receive an Acknowledgement:
•
Alarm sounds.
• The screen to the right is displayed.
7. Push any software key to turn
OFF the alarm.
•
The Acknowledgement
information is displayed.
information is displayed.
8.
Push the software key below
[EXIT].
•
“Terminate the Procedure Are
you sure?” is displayed.
9.
Push the software key below
[OK] to return to the operating
screen.
screen.