ICOM AP-3 사용자 설명서

SETTING SCREENS

1

49

y

This setting item is used to establish the security level. “0”
indicates the highest degree of security.

(default value: 0)

The encryption levels are as follows:
“0”= updates internal encryption key for every packet
“1”= updates internal encryption key every five packets
“2”= updates internal encryption key every ten packets
“3”= updates internal encryption key every fifty packets

u

This setting item is used to select the number of encryp-
tion bits. 

(default value: 64)

When “64 bits” is selected, the last 40 bits of the keys are
shown in the [WEP Key] text boxes. 
When “128 bits” is selected, the last 104 bits of the keys
are shown in the [WEP Key] text boxes. 
( The leading 24 bits are not displayed.

i

When 64-bit encryption is selected, the keys generated
from the character string entered into the [Key Generator]
text box are displayed in text boxes 1, 2, 3, and 4 in 40-
bit segments. When 128-bit encryption is selected, the
keys are displayed in 104-bit segments. 
Only the selected key (1, 2, 3, or 4) is used for encryption.
Select a key by putting a check in the adjacent check box.
The other device can only decrypt the signal from the AP-
3 when it is encrypting with one of the four keys (1, 2, 3,
or 4) shown here. 
* The keys can also be entered directly into the WEP key

text boxes (1, 2, 3, and 4). When this is done, a charac-
ter string will not be displayed in the [Key Generator]
text box.