ICOM IC-703 사용자 설명서

V

QUICK REFERENCE GUIDE

D Just listening
1. Select the desired band 

On your IC-703, an easy way of changing bands is by
using the [

(

Y)

BAND] or [

(

Z)

BAND

] located just right

corner on the front panel.

Push [

(

Y)

BAND] or [

(

Z)

BAND] to select the desired

band.

• Pushing [

(

Y)

BAND] or [

(

Z)

BAND] continuously scrolls

through the available bands.

• Say you want to go to 20 meters or 14 MHz; you

would push [

(

Y)

BAND] or [

(

Z)

BAND

] several times

to select it. This will change the displayed operating
frequency to the 20-meter band.

The band stacking register can also be

used to select bands. (Refer to p. 22)

[

Y]

[

Z]

Directly left of the [

(

Y)

BAND]/[

(

Z)

BAND

] is the main

dial. This will allow you to dial in the frequency you
want to operate. You will notice the tuning speed [TS]
is 10 Hz resolution. Page 20 will instruct you on how
to set the tuning speed [TS] for 1 Hz resolution.

Adjust this control to a comfortable audio level.

No audio output

Max. audio output

Decreases

Increases