ICOM IC-M45A 사용자 설명서
13
5
CONNECTIONS AND MAINTENANCE
■
Unpacking
➀
Mounting bracket ............................................................. 1
➁
DC power cable (OPC-891) ............................................ 1
➂
Microphone hanger ......................................................... 1
➃
Mounting bracket knobs .................................................. 2
➄
Mounting screws (5
×
20) ................................................ 2
➅
Mic hanger screws (3
×
16) ............................................. 2
➆
Flat washers (M5) ........................................................... 2
➇
Spring washers (M5) ....................................................... 2
➀
➂
➁
➃
➄
➅
➆
➇
➇
■
Antenna
A key element in the performance of any communication sys-
tem is an antenna. Ask your Dealer about antennas and the
best places to mount them.
tem is an antenna. Ask your Dealer about antennas and the
best places to mount them.
■
Fuse replacement
Two fuses are installed in the supplied DC power cable. If a
fuse blows or the transceiver stops functioning, track down
the source of the problem, if possible, and replace the dam-
aged fuse with a new, rated one.
fuse blows or the transceiver stops functioning, track down
the source of the problem, if possible, and replace the dam-
aged fuse with a new, rated one.
☛
Fuse rating: 10 A
■
Cleaning
If the transceiver becomes dusty or dirty, wipe it clean with a
dry, soft cloth.
dry, soft cloth.
AVOID the use of solvents such as benzene or al-
cohol, as they may damage transceiver surfaces.
cohol, as they may damage transceiver surfaces.
IC-M45A Manual 99.3.29 2:45 PM Page 13