ICOM IC-M602 사용자 설명서

HM-127 REMOTE-CONTROL MICROPHONE

➥While pushing [H/L], selects one of 3 regular channels

in sequence when pushed. (pgs. 8, 9, 62)

• International, U.S.A. and Canadian channels are available for

regular channels.

➥Starts dualwatch or tri-watch when pushed for 1 sec.

(pgs. 13, 66)

➥Stops dualwatch or tri-watch when either is activated.

y ATTENUATOR/INTERCOM/SCRAMBLER SWITCH

[LO/DX•IC•SCR]
➥Toggles the attenuator function ON or OFF when

pushed momentarily. (pgs. 10, 63)

• “LOCAL” appears when the attenuator is in use.

➥Activates the intercom function when pushed for 1 sec.

(pgs. 38, 68)

➥Calls the IC-M602 when pushed and held while in inter-

com mode. (pgs. 38, 68)

➥While pushing [H/L], activates an optional voice scram-

bler function. (pgs. 12, 65)

• The optional voice scrambler function cannot be used on

channel 16 and 70.

u SQUELCH/MONITOR/LOCK SWITCH [SQL•MONI•L]

➥[Y]/[Z] sets the squelch threshold level after pushing

[SQL]. (p. 63)

➥Push [SQL•MONI] for 1 sec. to turn the monitor function

ON. (p. 64)

➥While pushing [H/L], push [SQL•MONI•L] to toggle the

microphone key lock function ON or OFF. (p. 64)

• “ T ” appears while key lock function is in use.

• [PWR], [PTT], [VOL], [SQL] and [H/L] still function when the

microphone key lock function is turned ON.

➥Advance the cursor while in memory name program-

ming condition. (pgs. 11, 68)

i VOLUME/DIMMER SWITCH [VOL•DIM]

➥[Y]/[Z] adjusts the audio level after pushing [VOL].
➥Push [VOL•DIM] for 1 sec. to adjust the brightness of

the LCD and switch backlight. (p. 64)

➥Move the cursor backward while in memory name pro-

gramming condition. (pgs. 11, 68)

o TRANSMIT POWER SWITCH [H/L]

➥Toggles high and low power when pushed. (pgs. 10, 63)

• Some channels are set to low power only.

➥While pushing this switch, other switches perform sec-

ondary functions.

➥Toggles the all key lock function ON or OFF when

pushed while turning power ON. (p. 64)

• “ T ” flashes while the all key lock function is in use.
• Only [PWR] and [PTT] function when the all key lock function

is in use.

!0 SCAN SWITCH [SCN•TAG] (pgs. 15, 66)

➥Starts and stops normal or priority scan when tag chan-

nels are programmed.

➥Push [SCN•TAG] for 1 sec. to set the displayed channel

as a tag (scanned) channel.

➥While pushing [H/L], push for 3 sec. to clear all tag chan-

nels.