MI DONG Electronics & Telecommunication Co. LTD. MD-8500P 사용자 설명서
7. Updating (3)
[Manual updating]
1.
The firmware update file needs to be copied into the micro SD card (URIVE download center at
The micro SD card must be formatted first through the specific PC viewer or through the main body of the black box,
before copying the update file (main_md8500p_x.xx.xxxx_xxxxxx.bin) into the formatted memory card.
before copying the update file (main_md8500p_x.xx.xxxx_xxxxxx.bin) into the formatted memory card.
2. It is required to insert the micro SD card into the main body of the black box after powering off the black box.
3. Supply power to the black box.
4. Wait for about 10–20 seconds.
5. As the updating starts, the red and blue LEDs will blink and a short beeping sound will be generated.
6. When the updating process ends, the red and blue LEDs will be turned off and at the same time, a short beep buzzer
3. Supply power to the black box.
4. Wait for about 10–20 seconds.
5. As the updating starts, the red and blue LEDs will blink and a short beeping sound will be generated.
6. When the updating process ends, the red and blue LEDs will be turned off and at the same time, a short beep buzzer
sound will be generated. After a short while, the black box will restart.
Precaution: take precautions to make sure that the power is not turned off while the firmware updating is in progress.
After the firmware updating, the values of the environment setting previously set will be maintained.
14