MI DONG Electronics & Telecommunication Co. LTD. MD-8500P 사용자 설명서
11. Precautions for installation
▶ It is recommended to install the device in an area with a flat surface. The ignition must be turned off while installing.
▶ As the product needs to be built inside a car, it is required to supply the power and check first whether the front and rear
videos are stored normally before completing the process of building and installing it.
▶ When it is required to install the external camera, the camera must be connected while the power cable is not
connected to the black box.
▶ All the components necessary for the installation are packaged inside the product box. It is required to know the
installation method well and follow the procedures set while installing the system.
▶ Check first whether the micro SD card is inserted correctly before supplying the power.
▶ Take precautions not to install the product on a location that will disturb the user’s view.
▶ It will look cleaner and it will also its enhance safety features if the cables are hidden as much as possible.
▶ The windshield on which the product is installed needs to be kept clean.
▶ Installation should be performed in a safe and bright place.
▶ When a rear camera is attached onto the rear window, it would be impossible to record videos with the desired quality
because the window is tinted or lined with heat wires. Users need to pay attention to this when installing the black box.
▶Once the system is installed, users need to remove the protective vinyl covers on the front and rear camera lens before
using the system.
17