MI DONG Electronics & Telecommunication Co. LTD. MD-8500P 사용자 설명서

다운로드
페이지 46
2. Precautions before using the product
Scope of warranty and responsibilities
- This product is for assisting people in driving safely. The company will not be responsible for the loss that could occur due to
failures, data loss, or while using the product itself.
- This product is an ancillary device designed for recording and storing external videos. Some functions may not be supported
depending on the driving conditions and the conditions of a vehicle itself. When it comes to the level of support for performance that
is to be provided through the updating of firmware for improving quality and securing stability, it may vary depending on types of
products. Depending on situations, recording may not take place. Considering that, users need to use the product only for getting
information for checking driving-related videos. Recording may not take place also depending on the conditions of the SD card.
- This product is designed for recording the video related to an accident involving a user’s vehicle. However, it is not guaranteed that
a whole length of a video related to an accident is to be recorded. In case of an accident in which a minor shock occurs, the
detection sensor will not be activated, and, consequently, the video related to the event may not be recorded.
Precautions for using the memory card
- Check the data once a week at least for confirming that the product works normally.
- Format the micro SD memory card twice a month at least for using the product stably.
- Recommended to use a micro SD card that is exclusively designed for the product.
Generally, the memory card has a lifetime during which it can be used (6 months are guaranteed). If it has been used for a long period of 
time, it would be impossible to store new data. In that case, users need to buy a new memory card for using the product. It should be 
understood in advance that the company will not be held responsible, at all, for data loss due to long-time use. 
Removing the memory card or turning its power off while the recording is in progress may cause stored data at the last stage to be deleted. 
The company will not be held responsible for it at all. It is recommended to copy and store important data into other recording units.
5