Green Edge Technologies Inc XCVR2 사용자 설명서
Green Edge Technologies, Inc.
Confidential shared under NDA
Page 1 of 2
User Manual
21 October 2014
Antenna Selection
The antenna for Gen2 devices is a copper trace antenna integrated within the Transceiver PCB.
The antenna has been tuned to operate most effectively at 915MHz.
The antenna has been tuned to operate most effectively at 915MHz.
The module’s antenna is integrated into the PCB of the module, thus it require no external
antenna.
antenna.
It is recommended that the module is placed such that it antenna is more that 10mm from any
metal as to not degrade the performance of the antenna.
metal as to not degrade the performance of the antenna.
Labeling Instructions
Per FCC and IC requirements, any host device that contains this transceiver module must have
the module’s FCC & IC ID clearly labeled on the host device’s exterior.
the module’s FCC & IC ID clearly labeled on the host device’s exterior.
The label must include the module’s FCC & IC ID and must indicate that it “contains” the
module.
module.
For example:
"Contains Transmitter Module FCC ID: 2AACXXCVR2 - IC: 11483A-XCVR2"
or
"Contains FCC ID: 2AACXXCVR2"
"Contains IC: 11483A-XCVR2"
"Contains Transmitter Module FCC ID: 2AACXXCVR2 - IC: 11483A-XCVR2"
or
"Contains FCC ID: 2AACXXCVR2"
"Contains IC: 11483A-XCVR2"
FCC Statements
Changes or modification not expressly approved by Green Edge Technologies, Inc. (Green Edge)
could void the user’s authority to operate the device.
could void the user’s authority to operate the device.