ELAD srl FDM-DUO 사용자 설명서
ELAD FDM-DUO
User Manual Rev 1.04 10/2014
© 2014 ELAD S.r.l. All rights reserved. No part of this document may be reproduced, published, used, disclosed or disseminated in any form or
by any means, electronic, photocopying or otherwise, without prior written permission of ELAD S.r.l.
64
Run Flash Magic software.
In the “Step 1 – Communication” section:
In the “Step 1 – Communication” section:
Select LPC1766.
COM Port: the CAT USB com port
Baud Rate: 230400
Interface: None (ISP)
In the “Step 2 – Erase” section:
Check “Erase all Flash+Code Rd Prot”
In the “Step 3 – Hex File” section:
Click on Browse and select the update “.hex” file
In the “Step 4 – Options” section:
Check “Verify after programming
Check the communication with the FDM-DUO. Click on ISP and click on “Read Device Signatures”. If the
communication with the FDM-DUO is ok, a new windows with some device information is opened.
communication with the FDM-DUO is ok, a new windows with some device information is opened.
If the communication is Ok, click on close and in the Flash Magic main window, click on Start to begin
the programming. Wait until the end of the process, then turn off and restart the FDM-DUO.
the programming. Wait until the end of the process, then turn off and restart the FDM-DUO.