Fluid Handling LLC 6099B1500 사용자 설명서
• Protective gloves
• Gas mask
• Hearing protection
• First-aid kit
• Safety devices
• Gas mask
• Hearing protection
• First-aid kit
• Safety devices
NOTICE:
Never operate a unit unless safety devices are installed. Also see specific
Never operate a unit unless safety devices are installed. Also see specific
information about safety devices in other chapters of this manual.
Electrical connections
Electrical connections must be made by certified electricians in compliance with
all international, national, state, and local regulations. For more information
about requirements, see sections dealing specifically with electrical
connections.
Precautions before work
Observe these safety precautions before you work with the product or are in
connection with the product:
• Provide a suitable barrier around the work area, for example, a guard rail.
• Make sure that all safety guards are in place and secure.
• Make sure that you have a clear path of retreat.
• Make sure that the product cannot roll or fall over and injure people or
• Make sure that all safety guards are in place and secure.
• Make sure that you have a clear path of retreat.
• Make sure that the product cannot roll or fall over and injure people or
damage property.
• Make sure that the lifting equipment is in good condition.
• Use a lifting harness, a safety line, and a breathing device as required.
• Allow all system and pump components to cool before you handle them.
• Make sure that the product has been thoroughly cleaned.
• Disconnect and lock out power before you service the pump.
• Check the explosion risk before you weld or use electric hand tools.
• Use a lifting harness, a safety line, and a breathing device as required.
• Allow all system and pump components to cool before you handle them.
• Make sure that the product has been thoroughly cleaned.
• Disconnect and lock out power before you service the pump.
• Check the explosion risk before you weld or use electric hand tools.
Wash the skin and eyes
Follow these procedures for chemicals or hazardous fluids that have come
into contact with your eyes or your skin:
into contact with your eyes or your skin:
Condition
Action
Chemicals or hazardous
fluids in eyes
1.
Hold your eyelids apart forcibly with your fingers.
2.
Rinse the eyes with eyewash or running water for at least
15 minutes.
3.
Seek medical attention.
Chemicals or hazardous
fluids on skin
1.
Remove contaminated clothing.
2.
Wash the skin with soap and water for at least 1 minute.
3.
Seek medical attention, if necessary.
Environmental safety
The work area
Always keep the station clean.
Waste and emissions regulations
Observe these safety regulations regarding waste and emissions:
• Appropriately dispose of all waste.
• Handle and dispose of the processed liquid in compliance with applicable
• Handle and dispose of the processed liquid in compliance with applicable
environmental regulations.
Introduction and Safety
4
Laing Thermotech ACT-4 wireless Potable Hot Water Recirculation Kit Instruction
Manual