ONTOP TECHNOLOGY LTD BSP-002 사용자 설명서

Portable Bluetooth Speaker

1

• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical equipment.

This device complies with Part 15 of the FCC Rules and RSS standard 
of Industry Canada. Operation is subject to the following two 
conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to part 15 of the FCC 
Rules and ICES-003 of Industry Canada .

These limits are designed 

to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause harmful 
interference to radio communications.
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined 
by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures:
• Relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
RF Radiation Exposure Statement: This equipment complies with 
FCC’s

 and IC’s RF radiation exposure limits set forth for an 

uncontrolled environment. The antenna(s) used for this transmitter 
must be installed and operated to provide a separation distance of at 
least 20 cm from all persons and must not be collocated or operating in 
conjunction with any other antenna or transmitter. Installers must 
ensure that 20cm separation

 distance will be maintained between the 

device

 (excluding its handset) and users.

(WEEE).

2

• Place the unit on a level surface away from sources of direct 

sunlight or excessive heat.

• Protect your furniture when placing your unit on a natural wood 

and lacquered finish. A cloth or other protective material 
should be placed between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap 

and water. Stronger cleaning agents, such as Benzene, thinner 
or similar materials can damage the surface of the unit.

NOTE : This model is designed for use with Bluetooth 
wireless devices compatible with the 

HFP, HSP, A2DP and 

AVRCP streaming audio profiles. Refer to your Bluetooth 
device’s user
manual or technical support to determine if your Bluetooth 

3

To

 reduce the risk of fire or electric shock, do not expose the BSP-002 

to

 rain or moisture. The BSP-002 should not be exposed to dripping or 

splashing

, and objects filled with liquids, such as vases, should not be 

placed

 on or near it. Do not use near bathtubs, washbowls, kitchen 

sinks

, laundry tubs, in a wet basement, near a swimming pool, or 

anywhere

 else that water is present. As with any electronic products, 

use

 care not to spill liquids into any part of the product. Liquids can 

cause

 a failure and/or a fire hazard. The power supply must be used 

indoors

 only. It is neither designed nor tested for charging outdoors, in 

recreation

 vehicles, or on boats. Make no modifications to the product 

or

 accessories. Unauthorized alterations may compromise safety, 

regulatory

 compliance, and system performance, and will void the 

warranty

. Do not place any flame sources, such as lighted candles, on 

or

 near the BSP-002. The BSP-002 contains small parts that may be a 

choking

 hazard and is not suitable for children under age 3.

Before

 use, fully charge the battery by connecting the unit to computor 

or universal USB mobile charger through the provided USB cable

. Do 

not

 continue charging the battery if it does not reach full charge within 

the

 specified charging time. Overcharging may cause the battery to 

become

 hot, rupture, or ignite. If you see any heat deformation or 

leakage

, properly dispose of the battery. Do not attempt to charge

the

 battery in temperatures outside the range of 32°-104°F (0°-40°C). 

If

 the battery begins to leak, do not allow the liquid to come in contact 

with

 your skin or eyes. If contact has been made, wash the affected 

area

 with plenty of water and seek medical attention immediately. Do 

not

 expose the product or battery to excessive heat, including direct

sunlight

 or fire and storage or use inside cars in hot weather, where it 

can

 be exposed to temperatures in excess of 115°F (60°C). Doing so 

may

 cause the battery and power supply to generate heat, rupture, or 

ignite

. Using the product in this manner also may result in a loss of 

performance

 and a shortened life expectancy. Extended exposure to

direct

 sunlight may damage the external appearance and material 

qualities

. 

Do

 not step on, throw, or drop batteries or the power supply or device, 

or

 expose them to a strong shock. Do not pierce, crush, dent, or 

deform

 the batteries or power supply in any way. If either becomes 

deformed

, properly dispose of it. Do not short-circuit batteries. Refer

all

 servicing to qualified service personnel. Servicing is required when 

the

 apparatus has been damaged in any way: such as power supply 

cord

 or plug is damaged; liquid has been spilled or objects have fallen 

into

 the BSP-002; the BSP-002 has been exposed to rain or moisture, 

does

 not operate normally, or has been dropped. Do not attempt to

service

 the BSP-002 yourself. Opening or removing covers may 

expose

 you to dangerous voltages or other hazards and will void the 

manufacturer’s

 warranty. To prevent risk of fire or electric shock, 

avoid

 overloading wall outlets, extension cords, or integral 

convenience

 receptacles. Do not place your BSP-002 on high 

surfaces

 such as shelves. During music playback the BSP-002 may 

vibrate

 and move which could cause the speaker to shift and fall off of 

the

 edge. Your Bluetooth device (mobile phone, music player, tablet, 

laptop

, etc.) must support the A2DP Bluetooth profile in order to work 

wirelessly

 with your BSP-002 speaker. The A2DP profile is supported 

by

 most recent mobile products with built-in Bluetooth capability. 

Please

 refer to your device’s user manual for details and instruction 

regarding

 the Bluetooth profiles it supports.

4

BSP-002 has a built-in rechargeable Li-Polymer battery.

The red CHR 

indicator turns on while the battery is charging. The red indicator will 
turn off when the battery has fully charged (around 2 hours).

To charge the unit, please use the USB cable provided and connect it 
to a computer or a universal USB mobile charger. 

1
2
3

5

4

6

1.  module area

6. Charge/ Aux indicator

2. Function switch

7. Speaker Driver

3. Bluetooth indicator

8. Changeable Decoration ring

4. Charge/ Aux in socket

5. Wrist Strap hole

5

7

8

6

In order to use this unit for music playback through Bluetooth, 
the unit must first be paired with the Bluetooth device.

Pairing:
1. Slide the 

Function Switch to BT mode. The blue BT indicator 

will flash for 20 seconds to search the last linked device. Then, 
the unit will search for Bluetooth devices within range. While in 
search mode, the Red and Blue BT indicator will flash 
alternately. (searching will stop when no device is found to be in 
range within two and a half minutes, the unit will go to sleep 
mode)
2. Following the instructions on your device's user manual, 
activate Bluetooth on your device and search for devices.
Once you have found "BSP-002”, pair to the speaker. A pass 
code is not required.
3. Once connected, the Bluetooth indicator will flash slower than 
before.
4. Every time you power on this unit, it will pair with the last 
linked device when that device is in range.
NOTE: If no device is found in range or no device is paired or 
connected for 5 minutes. The unit will go to sleep mode.

You can connect an MP3 player or other portable audio device 
through this speaker via the Aux-in Jack.
1. Plug in the 3.5mm jack plug into the headphone or line-out 
jack on your device and plug in the micro USB jack into the unit.
2. Slide the Function Switch on the unit to AUX mode so that 
the green indicator for Aux-In mode turns on.
3. Turn on and play your device.
4. Adjust the volume level on your device.
To preserve power, remember to turn off the speaker when not in 
use.

Turn the Decoration Ring anti-clockwise, you can release the 
Decoration Ring. Turn it clockwise to lock the ring.

7

1. Once your device and this unit are paired you can start to play 
music through this speaker using the Bluetooth function.
2. Press the        Button on your device to play your music.
3. Press the       Button again to pause play

; press again to 

resume

 playback.

4. Press the Skip

Button on your device to Skip the track 

forward / Backward.
5. Press the Volume Button on your device to adjust the volume 
level up or down. 
NOTE: This unit must be in Bluetooth mode to pair and use a 
Bluetooth-enabled device.