E Measuring Device Limited USB01 사용자 설명서
72
9. Trouble Shooting and Services
Cannot power on your measuring tape
Check if the batteries are placed into the battery compartment correctly.
Make sure the batteries are at correct polarity and with good contact to the
metal terminals.
metal terminals.
Replace the batteries with new ones.
Reading on display unit is not correct
Check if there is any residual value on the display unit when tape is fully
retracted. If not, set the residual reading to “0.0” by pressing the ZERO key
switch.
retracted. If not, set the residual reading to “0.0” by pressing the ZERO key
switch.
Data cannot be transferred to your computer
Check if the USB receiver is correctly plugged onto your computer.
Check if the LED on the USB receiver lights on. If not, you may need to
replace your USB receiver.
replace your USB receiver.
Check if you have used another USB receiver of another measuring tape.
Check the serial number on the labels of the USB receiver and inside the
battery compartment of the measuring tape. The two serial numbers should
Check the serial number on the labels of the USB receiver and inside the
battery compartment of the measuring tape. The two serial numbers should