FUJI TECOM INC. 0002 사용자 설명서
LNL-1 manual Fujtecom., Inc. 2014
35
10. Message
10-1 “Full Memory Capacity Screen”
When data are registered up to the maximum quantity of 500, this screen is displayed after analyzer power
supply is turned on. The screen changes to the “Main Menu” when any key is pressed or 10 seconds later.
When data are registered up to the maximum quantity of 500, this screen is displayed after analyzer power
supply is turned on. The screen changes to the “Main Menu” when any key is pressed or 10 seconds later.
Delete the already registered data or use another SD card.
10-2 “Memory Card Error Screen”
If the memory card cannot be recognized or an error occurs to it, this screen is displayed when the analyzer
power supply is turned on or the memory card is accessed.
If the memory card cannot be recognized or an error occurs to it, this screen is displayed when the analyzer
power supply is turned on or the memory card is accessed.
Check whether the memory card is inserted.
Pull out the memory card and reinsert it.
Format the memory card.
Use a new memory card.
Pull out the memory card and reinsert it.
Format the memory card.
Use a new memory card.
10-3 “Analyzer Error Screen”
This screen is displayed if an error is detected in the analyzer when the analyzer power supply is turned on or if
its battery is charged at high temperature of 40 degrees or more. The power supply is automatically turned off
three seconds later.
This screen is displayed if an error is detected in the analyzer when the analyzer power supply is turned on or if
its battery is charged at high temperature of 40 degrees or more. The power supply is automatically turned off
three seconds later.
Contact your sales representative for repair.
Stop charging the battery and cool the analyzer in the well-ventilated cool place.
Stop charging the battery and cool the analyzer in the well-ventilated cool place.