CEI Conrad Electronic International Limited RCL-RR8-TP 사용자 설명서

8  |  Unpacking

> Do not take any risks when operating the model. Your own safety and that of your 

environment is solely down to you being responsible when dealing with the model.

> Use the product only if your ability to respond is unrestricted. The influence of tiredness, 

alcohol or medication can cause incorrect responses.

> Never switch off the »Transmitter while the model is in use. After landing, always disconnect 

the flight battery first and then switch the »Transmitter off.

> Correct polarity must be observed while inserting the batteries.

> Batteries should be removed from the device if it is not used for a long period of time to 

avoid damage through leaking. Leaking or damaged batteries might cause acid burns 
when in contact with skin, therefore use suitable protective gloves to handle corrupted   
batteries.

> Batteries must be kept out of reach of children. Do not leave batteries lying around. 

There is a risk that children or pets swallow them.

> All batteries should be replaced at the same time. Mixing old and new batteries in the 

device can lead to battery leakage and device damage. 

> Batteries must not be dismantled, short-circuited or thrown into fire. Never recharge 

non-rechargeable batteries. There is a risk of explosion!

> Consult an expert when in doubt about operation, safety or connection of the device.

> Maintenance, modifications and repairs are to be performed exclusively by an expert 

or at a qualified shop.

> If you have questions that remain unanswered by these operating instructions, contact 

our technical support service or other technical personnel.

> Work on a soft and clean mat.

> Open the box, take out all parts and open the polybags. Place all parts on the mat, but 

keep them together as packed in the polybags.