Peerless-AV SPK-060 사용자 설명서

2016-05-16    #:180-9069-1

Specifi cations subject to change without notice

42" (107cm) and above

Total System Power: 180 watts

103db

Digital Signal Processing (DSP)

(2) 3" [76mm] Aluminum Drivers

(2) 1.5" [38mm] Titanium Domes

(1) Analog 3.5mm connector, (1) Bluetooth 4.0 input

IP65

50Hz - 20kHz

-40° - 160°F (-40°C - 71°C)

400mm wide pattern

38.09" x 3.91" x 4.07" (967 x 99 x 103mm)

8.7lb (3.95kg)

• Source level should not exceed 80%.

• Verify the the 3.5mm audio plug is fully inserted.

• Verify that the soundbar is plugged into an outlet that has power. Ensure

that the audio signal cable is connected to the audio-out port on the TV.
Make sure that the source volume is not muted and that the volume level is
not at zero.  Aim the remote at the soundbar and select the desired input of
the source that is playing.

• Aim the remote at the front of the soundbar and hit the Blutetooth icon.

• Make sure Bluetooth is enabled on the device that is being connected and

that you are within 33' of the soundbar.

• Complete a device scan on the device that is being connected and select

"Peerless-AV" from the list of devices.

• If "Peerless-AV" is not present on the list, turn the Bluetooth on the device

off.  Turn the Bluetooth on the soundbar off by switching to the Aux input.
Turn the Bluetooth on the soundbar back on by pressing the Bluetooth
button on the soundbar remote. Turn the Bluetooth on your device back on
and perform another scan.