Gait Up PHYSILOG4 사용자 설명서
09.04.2014
3
Recording with Physilog®
© 2013, Gait Up Sàrl. www.gaitup.com
Attach
• Fix the Physilog® on the
subject
Start
• Press the button for 1-2
seconds
• The LED is blinking
green
every second
• > Physilog® is recording
Sense
• Ask the subject to perform a
movement according to your
protocol
protocol
Stop
• Once the subject has
finished, press again on the
button for a few seconds
button for a few seconds
• The LED is blinking
red
and
then turns off
• > Physilog® has created one
file and stoped recording
or
Charging and Data Transfer
Plug
• Plug the micro USB to
the Physilog®
• Plug the USB to the
Computer or Charger
Charging
• When connected to a
charger*, the LED is red
• > Physilog® is charging
Connect
• When connected to a
computer, the LED is
blinking
blinking
m
ul
ti
co
l
or
• Wait for few seconds
• >Physilog® is connected
• >Physilog® is connected
to your computer
Transfer
• Copy and paste Physilog®
files (*.bin) to your
prefered destination
prefered destination
*Charger is not provided by Gait Up. Gait Up
declines any responsability due to charger
usage. Please refer to supply voltage in the
product specification section.
declines any responsability due to charger
usage. Please refer to supply voltage in the
product specification section.
© 2013, Gait Up Sàrl. www.gaitup.com