Lutron Ketra LLC JA7 사용자 설명서
Title
Ketra VER003 2.4GHz ZigBee Module - User Manual
Size
A
Ketra Part Number
830-000005-xx
Rev
A
Date
May 12, 2014
Sheet
2 of 5
Description
The Ketra VER003 2.4GHz ZigBee Module (Ketra Part Number: 830-000005-xx) is
utilized in Ketra lighting and control systems. The module is used for
communication over private wireless network and not used for other commercial
purposes not designated by Ketra.
Ketra, Inc. designed the ZigBee Module compliant with the IEEE 802.15.4 standard.
The module is based upon the EM385x ZigBee SOC. The module’s key application is
for use with Ketra lighting control systems.
The Ember EM358x is a fully integrated System-on-Chip that integrates a 2.4 GHz,
IEEE
utilized in Ketra lighting and control systems. The module is used for
communication over private wireless network and not used for other commercial
purposes not designated by Ketra.
Ketra, Inc. designed the ZigBee Module compliant with the IEEE 802.15.4 standard.
The module is based upon the EM385x ZigBee SOC. The module’s key application is
for use with Ketra lighting control systems.
The Ember EM358x is a fully integrated System-on-Chip that integrates a 2.4 GHz,
IEEE
802.15.4-2003-compliant
transceiver,
32-bit
ARM®
CortexTM-M3
microprocessor, flash and RAM memory, and peripherals of use to designers of
ZigBee-based systems.
The transceiver uses an efficient architecture that exceeds the dynamic range
requirements imposed by the IEEE 802.15.4-2003 standard by over 15 dB. When
operating on channel 26, the radio transmit power shall be set no higher than
+3dBm. When operating on channels 11-25 the transmit power may be set as high
as +8dBm. The integrated receive channel filtering allows for robust co-existence
with other communication standards in the 2.4 GHz spectrum, such as IEEE 802.11-
2007 and Bluetooth. The integrated regulator, VCO, loop filter, and power amplifier
keep the external component count low.
The Zigbee Module communicates over wireless network to control the color point
and intensity (among other items) of the end product lamp and/or luminaire. The
Zigbee module can be designed into various end products for communication needs.
Examples are Ketra S38 lamp, Keypad wireless controller and Satellite controller.
Software and firmware are defined by Ketra per product as required.
The ZigBee Module is intended to interface with compatible Ketra products and is
powered and controlled per manufacturers recommended operating conditions.
ZigBee-based systems.
The transceiver uses an efficient architecture that exceeds the dynamic range
requirements imposed by the IEEE 802.15.4-2003 standard by over 15 dB. When
operating on channel 26, the radio transmit power shall be set no higher than
+3dBm. When operating on channels 11-25 the transmit power may be set as high
as +8dBm. The integrated receive channel filtering allows for robust co-existence
with other communication standards in the 2.4 GHz spectrum, such as IEEE 802.11-
2007 and Bluetooth. The integrated regulator, VCO, loop filter, and power amplifier
keep the external component count low.
The Zigbee Module communicates over wireless network to control the color point
and intensity (among other items) of the end product lamp and/or luminaire. The
Zigbee module can be designed into various end products for communication needs.
Examples are Ketra S38 lamp, Keypad wireless controller and Satellite controller.
Software and firmware are defined by Ketra per product as required.
The ZigBee Module is intended to interface with compatible Ketra products and is
powered and controlled per manufacturers recommended operating conditions.