Shenzhen Fostar Electronic Co. Ltd FC2403P-2405P 사용자 설명서

How to assign a different HTTP Port No. and fixed the LAN IP of the camera by the IP Camera Tool？

Step 1:

Open the IP Camera Tool, select the camera you would like to change the port of, right click on the IP

address, and click on ”Network Configuration”, this brings up the network configuration box.

Figure 2.4

Figure 2.5

Step 2:

Enter the username and password of the Administrator (default username is admin with a blank

password), and click “OK” to apply changes.

Step 3:

Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. In our example it

was changed to 2000, so we see http://192.168.1.110:2000 in IP Camera Tool. Also, the LAN IP address is
now fixed at a static IP address of http://192.168.1.110:2000. This IP address will not change even if the
camera is powered off and back on, the camera will remain on this LAN IP address. This is very important that
a static LAN IP address is set, or you may have problems later with remote access and seeing the camera

Select which camera

you’d like to change the

port for, and right click

Modify the Http Port.

Enter the Username and

password, click OK.