Shenzhen Fostar Electronic Co. Ltd FC2403P-2405P 사용자 설명서

Figure 4.34

Figure 4.35

Step 2:

Enter the username and password of the Administrator (default username is admin with a blank

password), and click “OK” to apply changes.

Step 3:

Wait around 10 seconds, you’ll see that the camera’s LAN IP address has changed. In our example it

was changed to 2000, so we see http://192.168.1.110:2000 in IP Camera Tool. Also, the LAN IP address is
now fixed at a static IP address of http://192.168.1.110:2000 . This IP address will not change even if the
camera is powered off and back on, the camera will remain on this LAN IP address. This is very important that
a static LAN IP address is set, or you may have problems later with remote access and seeing the camera
remotely if the camera loses power and reconnects on a different LAN IP address. Make sure you set a static
LAN IP address!

Figure 4.36

Select which camera

you’d like to change the

port for, and right click

Modify the Http Port.

Enter the Username and

password, click OK.