Shenzhen Fostar Electronic Co. Ltd FC2403P-2405P 사용자 설명서
61
61
Figure 4.54
There are four alarm indicators:
A Camera Sound
and PC Sound
If the camera has connected with a speaker or other audio output device, if you select Camera Sound or PC
Sound, when the motion has been detected, the people around the camera will hear beep alarm sound.
Sound, when the motion has been detected, the people around the camera will hear beep alarm sound.
B Send E-mail
If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail
Settings first. The alarm email cannot contain the alarm picture if you have not selected Take Snapshot.
If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail
Settings first. The alarm email cannot contain the alarm picture if you have not selected Take Snapshot.
C Take Snapshot
If you select this checkbox, when the motion has been detected, the camera will snap the live view window as
a still picture and load it to the FTP. Make sure you have set FTP and set FTP as the storage path in
Video->Snapshot settings panel.
If you select Send Email, at the same time the picture will be send to you as an attachment.
If you select this checkbox, when the motion has been detected, the camera will snap the live view window as
a still picture and load it to the FTP. Make sure you have set FTP and set FTP as the storage path in
Video->Snapshot settings panel.
If you select Send Email, at the same time the picture will be send to you as an attachment.
Capture interval:
The interval time between two pictures.
D Recording
(except for FC1403P)
If you select this checkbox, when the motion has been detected, the camera will record automatically and store
the record files to the SD Card. Make sure the camera has inserted SD card and you have set the SD card as
the Alarm record files storage path, please go to Record—> Storage location page to verify this settings.
The default alarm record time is 30s and pre-alarm record time is 5s, please go to Record—> Alarm Record
page and change the alarm time settings.
the record files to the SD Card. Make sure the camera has inserted SD card and you have set the SD card as
the Alarm record files storage path, please go to Record—> Storage location page to verify this settings.
The default alarm record time is 30s and pre-alarm record time is 5s, please go to Record—> Alarm Record
page and change the alarm time settings.
Step 05: Set detect area
Click set detect area and it pop up a window, then you can draw the detection area. Click OK button after
settings. When something moving in the detection area, the camera will alarm.
settings. When something moving in the detection area, the camera will alarm.