HLS Technology Corporation Limited D3-1 사용자 설명서
This camera automatically stops recording when the battery is out of power. Your video will saved before the camera
powers off.
This camera automatically stops recording when the SD card is full,if the looping record function is turn off.
PHOTO MODE
P
hoto
To capture photo, verify the camera is in desiredPhoto Mode and set the desired photo resolution,if the photo icon in
your camera’s LCD is not showing, press the Power/Mode Button repeatedly to thePhotoSettingMenu and select the
desired optionsuch asTime-lapse Photo/Burst Photo.
To capture a photo:
Press the Shutter/Select Button. The camera will emit the camera shutter sound.
To capture Time Lapse Photo series:
Verify the camera is selecteddesiredTime Lapse Photomode, Press the Shutter Button, the camera will initiate
countdown and emit shutter sound as soon as a photo is taken.
To capture a Burst Photo series:
Verify the camera is selecteddesiredBurstPhotomode, Press the ShutterButton, the camera will emit shutter sound each
time a photo is taken.
Tips:
1: Burst Photos only support the photo resolution of 12M/ 8M/5M,do not support the photo resolution above 12M.
2: Time-Lapse PhotoandBurst Photo can not be selected at the same time.
PLAYBACK / DELETE FILES
Playing back on camera
Verify the camera is in Video or Photo Playback menu.Press the UP/Down Button to cycle the videos or photos and then
Press the Shutter/Select Button to playback the desired options,
to exit playback mode, press the Power/Mode Button to the main preview menu, press the Power/Mode Buttonagain
to switch setting modes
Playing back on TV