Wi-MM Corporation BP200-2-2-1 사용자 설명서
Wi‐MM BP200 Users Manual (Page1)
Wi‐MM’s BP200 is a state of the art battery powered asset tracker and sensor platform adaptable to a
wide variety of applications including: bicycle fleet management, cargo tracking, and mobile asset
security. The small and versatile BP200 can be powered or charged from a wide range of power
sources: +5V to +50V AC or DC or from a solar panel. The BP200 is used in conjunction with the Wi‐MM
web Dashboard.
wide variety of applications including: bicycle fleet management, cargo tracking, and mobile asset
security. The small and versatile BP200 can be powered or charged from a wide range of power
sources: +5V to +50V AC or DC or from a solar panel. The BP200 is used in conjunction with the Wi‐MM
web Dashboard.
Each BP200 has unique cellular network credentials, an assembly serial number, and a set of
identification values linked to the asset associated with the particular BP200. All identification
information and cellular network provisioning should be coordinated with Wi‐MM Customer Service
prior to deploying the unit.
identification values linked to the asset associated with the particular BP200. All identification
information and cellular network provisioning should be coordinated with Wi‐MM Customer Service
prior to deploying the unit.
The BP200 charge indication LED will light RED, when the unit is charging. Full charge is achieved when
the RED LED goes off and the adjacent GREEN LED goes on. If the battery is fully depleted, it will take 3
to 4 hours for the unit to full re‐charge.
The charge state of the battery at any given time is dependant upon the particular application. For
security applications, the BP200 can remain dormant for more than two months and then wake up
based on an accelerometer triggered event. For bike fleet applications, wired recharging can be
eliminated and power for the unit can be derived from a dynamo hub generarator or solar panel.
For battery power conservation, the BP200 will default to sleep mode, if none of the stimuli listed
below are present. The BP200 can be factory configured to awaken based on any combination of:
the RED LED goes off and the adjacent GREEN LED goes on. If the battery is fully depleted, it will take 3
to 4 hours for the unit to full re‐charge.
The charge state of the battery at any given time is dependant upon the particular application. For
security applications, the BP200 can remain dormant for more than two months and then wake up
based on an accelerometer triggered event. For bike fleet applications, wired recharging can be
eliminated and power for the unit can be derived from a dynamo hub generarator or solar panel.
For battery power conservation, the BP200 will default to sleep mode, if none of the stimuli listed
below are present. The BP200 can be factory configured to awaken based on any combination of:
Accelerometer Trigger = Physical Movement
Dynamo Generator Output Present = Wheel Turning
API call from customer application = Kiosk Checkout
Manufacturer: Wi-MM Corp.
Model: BP200-2-2-1
FCC ID: 2ABUE-BP200-2-2-1
IC: 11915A-BP200221 Model BP200-2-2-1
Model: BP200-2-2-1
FCC ID: 2ABUE-BP200-2-2-1
IC: 11915A-BP200221 Model BP200-2-2-1