EMW Co. Ltd BHA-WN400 사용자 설명서
63
7. DEVICE
7.1. GENERAL
1) DISPLAY : Please decide output video resolution
It can be set to the correct video resolution on the monitor.
[1920*1080P (default) 800*600 1024*768 1280*720 1280*1024
1600*1200 1680*1050 1920*1080I]
HDMI AUTO
Automatically detects and sets the HDMI resolution on the monitor connected to the
NVR. It might display “no video” if a VGA monitor is not able to support high
NVR. It might display “no video” if a VGA monitor is not able to support high
resolution.
<NOTE>
In order to connect HDMI and VGA output to use both monitors, please set up
as the lowest resolution without selecting HDMI AUTO.
2) Keypad Model: Select Joystick Controller and Baud Rate.
3) Extend Device: Select a model of POS/ATM.
4) PTZ Event: BHA-WC100 Model does not support this feature.
5) Alarm Out: DURATON [OFF,1SEC ~ 5 SEC]: Select Alarm duration.
6) IP CAM SET UP :
3) Extend Device: Select a model of POS/ATM.
4) PTZ Event: BHA-WC100 Model does not support this feature.
5) Alarm Out: DURATON [OFF,1SEC ~ 5 SEC]: Select Alarm duration.
6) IP CAM SET UP :
After click in the menu, all IP cameras which are connected in LAN
network will be listed in the IP CAM Discovery menu.
network will be listed in the IP CAM Discovery menu.