EMW Co. Ltd BHA-WN400 사용자 설명서

 

7 

 

 

z

  Avoid Strong Magnetic Fields. Never place the NVR in close Proximity to electric motors or 

other equipment generating strong electromagnetic fields. Exposures to strong magnetic 

fields may cause malfunctions or corrupt image data. 

z

  Avoid Condensation Related Problems. Moving the equipment rapidly between hot and cold 

temperatures may cause condensation (water droplets) to form on its external and internal 

surfaces. You can avoid this by placing the equipment in an airtight, resalable plastic bag and 

letting it adjust to temperature changes slowly before removing it from the bag. 

z

 

If Condensation forms inside the Digital Video Recorder. Stop using the equipment 
immediately if you detect condensation. Continued use may damage the equipment. Remove 

the power cord from the power outlet and wait until the moisture evaporates completely 

before resuming use. 

 

 

 

 : This equipment has been tested and found to comply with the limits for a 

Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference when the equipment is operated in a commercial 

environment. This equipment generates, uses, and can radiate radio frequency energy and, if no 

installed and used in accordance with the instruction manual, may cause harmful interference to radio 

communications. Operation of this equipment in a residential area is likely to cause harmful 

interference in which case the user will be required to correct the interference at his own expense. 

 

Caution: Exposure to Radio Frequency Radiation. 

To comply with FCC RF exposure compliance requirements, for mobile configurations, a separation 
distance of at least 20 cm must be maintained between the antenna of this device and all persons. 
This device must not be co-located or operating in conjunction with any other antenna or 
transmitter 
 

The optical disc drive such as DVD Super Multi (Double Layer) Drive 22X that is used in this computer 

is equipped with laser. The classification label with the following sentence is affixed to the surface of 

the drive.   

CLASS 1 LASER    PRODUCT TO IEC60825-1 LASER KLASSE 1 The drive with the above label is 

certified by the manufacturer that the drive complies with the requirement for laser product on the date 

Regulatory