Security People Inc. dba Digilock LO6I02NAO01 사용자 설명서
SC-20-100D-10 Self-Contained RFID Latch
Operating Instructions
J-SC-20-1000-M_rev7 (PRE-PRODUCTION)
Page 3 of 4
Of Manager Keys, User Keys, and RFID Cards
1.
On the lock with the assigned Manager Key(s), User Key(s), and
RFID card(s) to be copied, press and hold the wake-up button.
Continue to press the wake-up button after the wake-up beep
and first and second programming beeps, until the latch emits
the programming beep three times. When the button is
released, the status indicator will begin to flash.
RFID card(s) to be copied, press and hold the wake-up button.
Continue to press the wake-up button after the wake-up beep
and first and second programming beeps, until the latch emits
the programming beep three times. When the button is
released, the status indicator will begin to flash.
2.
While the status indicator is flashing, touch the Programming
Key to the lock until the lock emits two confirmation beeps.
Key to the lock until the lock emits two confirmation beeps.
3.
Touch the Programming Key to the lock requiring registration
until the lock emits two confirmation beeps indicating successful
express registration.
until the lock emits two confirmation beeps indicating successful
express registration.
4.
Continue to touch the Programming Key to all locks requiring
registration.
registration.
5.
To end the express registration sequence, press the wake-up
button on any registered lock then touch the Programming Key
to the lock until it operates indicating that the express registration
sequence has ended.
button on any registered lock then touch the Programming Key
to the lock until it operates indicating that the express registration
sequence has ended.
WARNING: The programming key will continue to operate in Express
Registration mode unless Step #5 is performed.
Normal Use
After the latch has been programmed, it can be unlocked using RFID
cards, User Keys, Manager Keys, or the Programming Key, as follows:
Using an RFID Card
Normal Use
After the latch has been programmed, it can be unlocked using RFID
cards, User Keys, Manager Keys, or the Programming Key, as follows:
Using an RFID Card
1.
Press and hold the wake-up button until the wake-up beep is
heard.
heard.
2.
Hold an enrolled RFID card near the latch. The latch will unlock
and the status indicator will flash for six seconds.
and the status indicator will flash for six seconds.
3.
While the status indicator is flashing, turn the knob to open the
latch.
latch.
4.
The latch will re-lock after six seconds. Turn the knob to its
original position to secure the latch.
original position to secure the latch.
Using a User Key (p/n SC-A30-10)
1.
Contact an assigned User Key to the electronic key reader. The
latch will unlock and the status indicator will flash for six
seconds.
latch will unlock and the status indicator will flash for six
seconds.
2.
While the status indicator is flashing, turn the knob to open the
latch.
latch.
3.
The latch will re-lock after six seconds. Turn the knob to its
original position to secure the latch.
original position to secure the latch.
Using a Manager Key (p/n SC-A20-10)
1.
Contact an assigned Manager Key to the electronic key reader.
The latch will unlock and the status indicator will flash for six
seconds.
The latch will unlock and the status indicator will flash for six
seconds.
2.
While the status indicator is flashing, turn the knob to open the
latch.
latch.
3.
The latch will re-lock after six seconds. Turn the knob to its
original position to secure the latch.
original position to secure the latch.
Using a Programming Key (p/n SC-A10-10)
1.
Press and hold the wake-up button until the wake-up beep is
heard.
heard.
2.
Contact the Programming Key to the electronic key reader. The
latch will unlock and the status indicator will flash for six
seconds.
latch will unlock and the status indicator will flash for six
seconds.
3.
While the status indicator is flashing, turn the knob to open the
latch.
latch.
4.
The latch will re-lock after six seconds. Turn the knob to its
original position to secure the latch.
original position to secure the latch.