Golden Mark Limited PD100 사용자 설명서
RISK OF FIRE, ELECTRICAL SHOCK & BURNS
DO NOT USE WITH MEDICAL AND LIFE SUPPORT INSTRUMENT
No user serviceable parts are in this module
To minimize the risk of electric shock, the power plug of this module has a grounding pin
which only fits into a grounding 3-prong electrical outlet. Please call a qualified electrician to
replace the outlet if the plug does not fit into it. Do not attempt to change the plug in any way.
which only fits into a grounding 3-prong electrical outlet. Please call a qualified electrician to
replace the outlet if the plug does not fit into it. Do not attempt to change the plug in any way.
The lighting devices connected to this Z-Wave module must not exceed 2.5A, 300W
incandescent, 100W dimmable CFL/LED.
incandescent, 100W dimmable CFL/LED.
CAUTION: To Reduce the Risk of Overheating And Possible Damage To Other Equipment,
Do Not Install To Control A Motor-Operated Appliance, A Non-Dimmable Fluorescent
Lighting Fixture, Or A Transformer-Supplied Appliance
Do Not Install To Control A Motor-Operated Appliance, A Non-Dimmable Fluorescent
Lighting Fixture, Or A Transformer-Supplied Appliance
SETUP
Step 1. Plug the 2-pin AC power plugs of lighting device to the receptacle of PD-100
Step 2. Insert the module's 3-pin plug into an AC outlet of your preferred location. In normal
operating mode, the LED on the front panel will be lit.
operating mode, the LED on the front panel will be lit.