Red Bear Company Limited DUO 사용자 설명서

Congratulations on being the owner of a brand new 

RedBear Duo

! Now, you can open the box and follow this guide to play with the

Duo.

This getting started guide will show you how to use the RedBear Duo IoT development board quickily. There are two sections:

Out of the box test

Checking firmware version

Checking device ID

Updating firmware

Assocaiting to an Access Point (AP) or Internet router

Develop an application using WebIDE or Arduino IDE.

You need to prepare the following hardware items:

PC with Windows, Linux (e.g. Ubuntu) or Mac with OSX

Tested on: Windows 10, OSX 10.11

Access Point (e.g. an Internet router at your home).

For the Duo to have Internet connection

Micro USB cable

Note: some cables only for power, you need a data+power cable for the Duo.

RBLink (optional, easier with its drag & drop feature)

Software items:

dfu-util

Latest Duo Firmware

https://github.com/redbear/Duo/raw/master/firmware/

For Windows, you also need the following software tools:

PuTTY

or you can use other serial port tool (e.g. HyperTerminal)

Driver

Zadig

Connect the Duo to your PC via the USB port with a micro USB cable.

The RGB LED will show Blue in color and keep flashing (i.e. Listening Mode).