SHENZHEN IP-COM NETWORKS CO. LTD. AP375 사용자 설명서
101
LED
This function enables you to turn on/off the LED indicator of the default, the LED indicator is turned
on.
on.
Procedure for turning off the LED indicator:
1.
Choose Tools > LED.
2.
Click Disable all LEDs.
---End
Procedure for turning on the LED indicator:
1.
Choose Tools > LED.
2.
Click Enable all LEDs.
---End
Uplink Detection
Overview
In AP mode, the AP connects to its upstream network using the LAN0 port. If a critical node between
the LAN0 port and the upstream network fails, the AP as well as the wireless clients connected to
the AP cannot access the upstream network. If uplink detection is enabled, the AP regularly pings
specified hosts through the LAN0 port. If all the hosts are not reachable, the AP stops its wireless
service and wireless clients cannot find the SSIDs of the AP. The client can reconnect to the AP only
after the connection between the AP and the upstream networks is recovered.
the LAN0 port and the upstream network fails, the AP as well as the wireless clients connected to
the AP cannot access the upstream network. If uplink detection is enabled, the AP regularly pings
specified hosts through the LAN0 port. If all the hosts are not reachable, the AP stops its wireless
service and wireless clients cannot find the SSIDs of the AP. The client can reconnect to the AP only
after the connection between the AP and the upstream networks is recovered.
If the uplink of the AP with uplink detection enabled is faulty, wireless clients can connect to the
upstream network through another nearby AP that works properly.
upstream network through another nearby AP that works properly.
The following figure shows the upstream network of the AP.