SHENZHEN IP-COM NETWORKS CO. LTD. AP375 사용자 설명서

 

12 

 

WIFI Radio 

It specifies the RF band to be configured. 

This AP provide three RF bands. RF band 1 is a 2.4GHz band, RF band 2 is a 5 GHz band, 
whereas RF band 3 is a 2.4 GHz or 5 GHz band. 

Mode 

It specifies the working mode of the AP, including the AP mode and AP+Client mode. 

SSID 

It enables you to change the primary SSID of the selected RF band. 

Security Mode 

It specifies the security mode corresponding to the SSID. The options include: None, WEP, 
WPA-PSK, WPA2-PSK, Mixed WPA/WPA2-PSK, WPA, and WPA2. 

The option None allows any wireless clients to connect to the AP. This option is not 
recommended because it affects network security. 

After the configuration, you can select the SSID on your wireless devices such as smart phones and 
enter your wireless network password to connect to the wireless network of the AP and access the 
internet through the AP. 

Choose Quick Setup. 

Set WIFI Radio to the RF band you want to set, such as Radio 1 

– 2.4 GHz. 

Set Mode to APClient Mode. 

Click Enable Scan. 

 

Select the wireless network to be extended from the wireless network list that appears. 

4UZK

 

− 

If no wireless network is found, ensure that the selected RF band is enabled, and try scanning wireless networks 
again. 

− 

After a wireless network to be extended is selected, the AP identifies the SSID, security mode, and channel of 
the wireless network and enters them on the page. The other parameters including Security Key, RADIUS 
Server, RADIUS Port, and RADIUS Password must be entered manually. 

Click Disable Scan.