SHENZHEN IP-COM NETWORKS CO. LTD. AP375 사용자 설명서
57
Parameter description
Parameter
Description
Duration for
every channel
every channel
It specifies the duration for scanning each channel. The default duration is 1000 ms.
Channel
It specifies all the channels corresponding to the selected RF band.
Background
Noise (dBm)
Noise (dBm)
It specifies the background noise of a specific channel. The unit is dBm.
Channel
Utilization (%)
Utilization (%)
It specifies the use rate of a specific channel.
A channel use rate from 0%~50% is displayed in green, which indicates that the channel is idle.
A channel use rate from 50%~80% is displayed in yellow, which indicates that the channel is
busy. A channel use rate from 80%~100% is displayed in red, which indicates that the channel
is very busy.
A channel use rate from 50%~80% is displayed in yellow, which indicates that the channel is
busy. A channel use rate from 80%~100% is displayed in red, which indicates that the channel
is very busy.
Detecting Rogue APs
1.
Choose Wireless > Frequency Analysis.
2.
Click the 2.4GHz Illegal AP Detection or 5GHz Illegal AP Detection tab.
3.
Click Enable Scan.
---End