SHENZHEN IP-COM NETWORKS CO. LTD. AP375 사용자 설명서
60
1.
Choose Wireless > WMM Setup.
2.
Select the RF band for which WMM is to be configured.
3.
Set WMM to Enable.
4.
Select the required WMM optimization mode.
5.
If you select Custom, set the WMM parameters as required.
6.
Click Save.
---End
Parameter description
Parameter
Description
WMM
It specifies whether to enable the WMM function.
WMM Optimization
Mode
Mode
It allows you to select a WMM optimization mode or set WMM parameters.
AP375 provide the WMM optimization modes. You can select a mode according to the
number of users concurrently connected to the AP.
number of users concurrently connected to the AP.
−
Optimized For Throughput(Concurrent Users <=10): If 10 or less clients are
connected to the AP, you are recommended to select this mode to increase client
throughput.
connected to the AP, you are recommended to select this mode to increase client
throughput.
−
Optimized For Throughput(Concurrent Users >=10): If more than 10 clients are
connected to the AP, you are recommended to select this mode to ensure client
connectivity.
connected to the AP, you are recommended to select this mode to ensure client
connectivity.
−
Custom: This mode enables you to set the WMM EDCA parameters for manual
optimization.
optimization.
No ACK
−
If the check box is selected, the No ACK policy is adopted.
−
If the check box is deselected, the Normal ACK policy is adopted.
EDCA Parameters
For details, refer to section 5.1.