SHENZHEN IP-COM NETWORKS CO. LTD. AP375 사용자 설명서
65
Parameter
Description
interface resource usage and ensure bandwidth for valid service data.
−
Disable: It indicates that broadcast data is not filtered.
Option Mode
It is required if Filter Broadcast Data is set to Enable.
−
Partially Filtered (excluding DHCP and ARP): It indicates that all broadcast or
multicast data other than DHCP and ARP broadcast data is filtered.
multicast data other than DHCP and ARP broadcast data is filtered.
−
Partially Filtered (excluding ARP): It indicates that all broadcast or multicast data other
than ARP broadcast data is filtered.
than ARP broadcast data is filtered.
QVLAN
Overview
The AP supports 802.1Q VLANs and is applicable in a network environment where 802.1Q VLANs
have been defined. By default, the QVLAN function is disabled.
have been defined. By default, the QVLAN function is disabled.
Configuring the QVLAN Function
1.
Choose Wireless > QVLAN.
2.
Change the parameters as required. Generally, you only need to change the Enable option, the
VLAN IDs of wired LAN ports, and the SSID VLAN IDs of RF bands.
VLAN IDs of wired LAN ports, and the SSID VLAN IDs of RF bands.
3.
Click Save.
---End
Parameter description