Mesh Systems LLC DH001 사용자 설명서
P a g e
| 10
Version 1.0
DOW CONFIDENTIAL - Do not share without permission
Identity Section
Field Name
Field Name
Req
Description
For snap trap devices, an ActiveSense snap foot is available.
Contact your ActiveSense Specialist for details.
Default Exterior Device Type
Y
Associates a default exterior device type for a site. As sensors are
installed on location, the default sensor configuration for the
device type will be applied. If multiple exterior device types exist,
these may be overridden at installation time (to fit the exact device
type for which the sensor is placed).
Should this sensor configuration require modification (e.g., sensor
notifications and reports are inconsistent), contact your
ActiveSense Specialist for re-configuration.
For snap trap devices, an ActiveSense snap foot is available.
Contact your ActiveSense Specialist for details.
installed on location, the default sensor configuration for the
device type will be applied. If multiple exterior device types exist,
these may be overridden at installation time (to fit the exact device
type for which the sensor is placed).
Should this sensor configuration require modification (e.g., sensor
notifications and reports are inconsistent), contact your
ActiveSense Specialist for re-configuration.
For snap trap devices, an ActiveSense snap foot is available.
Contact your ActiveSense Specialist for details.
Step 3.3
Click
to retain the site information.
Note: A future version may allow New Site creation via the Mobile App
Section 3: Installing Hardware
Section 3.1: Typical Coverage Expectations
Section 3.1.1: Physical Facility
The ActiveSense Hub is expected to fully support an installed site having a total square footage of
approximately 60,000 SQFT. If additional sensor coverage is required, ActiveSense Range Extenders may
be installed at an installation site, extending the Hub’s total site coverage area by approximately 30,000
SQFT.
approximately 60,000 SQFT. If additional sensor coverage is required, ActiveSense Range Extenders may
be installed at an installation site, extending the Hub’s total site coverage area by approximately 30,000
SQFT.
Maximum ActiveSense Devices per installation site:
1 Hub Device per site
3 Range Extenders per hub
Up to 80 rodent sensors per hub
Section 3.1.2: Cellular Coverage
ActiveSense components require Verizon cellular coverage in order to communicate sensor statistics. To
verify Verizon coverage at the site location or area, visit the following web page:
verify Verizon coverage at the site location or area, visit the following web page:
https://vzwmap.verizonwireless.com/dotcom/coveragelocator/