Mesh Systems LLC DH001 사용자 설명서
P a g e
| 27
Version 1.0
DOW CONFIDENTIAL - Do not share without permission
ActiveSense Decommissioning
Section 4: Un-installing (Decommission) Hardware
This process requires access from the mobile device (sensor decommission) as well as from the web
portal (site decommission) .
portal (site decommission) .
Section 4.1: Un-install (Decommission) a Sensor
Decommissioning a sensor from an existing hub places the sensor into airplane mode, which extends
the battery life of the sensor.
the battery life of the sensor.
Note: A future version of ActiveSense may support synchronous un-installation.
Step 1: Place the ActiveSense Activator over the Activation Point as indicated for 10 seconds. The green
light will illuminate first; when the red light illuminates, the decommission is complete. While
uninstalled, both lights remain off.
light will illuminate first; when the red light illuminates, the decommission is complete. While
uninstalled, both lights remain off.
Figure 25: Sensor Decommission
Step 2: From the Web Portal, navigate to the Site>Sensor List.
.
Step 3: Select the proper Sensor and then select
This Sensor is now decommissioned from the previous site. It may now be installed to another Hub
at another ActiveSense site location.