Cooper Lighting 2CL60WXSW 사용자 설명서
3
Product Description
www.eaton.com/lightingsystems
Product Description
The Greengate Wireless Wall Switch Controller is a wireless
control device that combines simple and secure user setup
with robust communication offered by its industry leading
802.11 based architecture. The Wireless Wall Switch is used
with companion WOAC-P Series Occupancy Sensors for
energy savings and convenience
Wiring
CAUTION: Before installing or performing any service on
a Greengate system, the power MUST be turned OFF at
the branch circuit breaker. According to NEC 240-83(d), if
the branch circuit breaker is used as the main switch for
a fluorescent lighting circuit, the circuit breaker should be
marked “SWD”. All installations should be in compliance
with the National Electric Code and all state and local code.
NOTE REGARDING COMPACT FLUORESCENT LAMPS:
The life of some compact fluorescent lamps (CFLs) is
shortened by frequent automatic or manual switching.
Check with CFL and ballast manufacturer to determine
the effects of cycling.
1. Make sure power is turned OFF at the branch circuit
breaker.
2. Wire units as shown in wiring diagrams per applicable
voltage requirements.
3. Mount unit to Wall Box.
4. Turn power back ON at the branch circuit breaker and
4. Turn power back ON at the branch circuit breaker and
wait 30seconds for the unit to stabilize.
5. Make any necessary adjustments.
6. Install Wall Switch plate.
6. Install Wall Switch plate.