Hangzhou Gubei Electronics Technology Co. Ltd E-REMOTE 사용자 설명서

Router

Plug the RM’s power supply into a power outlet, and keep RM in Wi-Fi coverage, then connect 

your smartphone to Wi-Fi.

Ensure the Wi-Fi light on RM is flashing rapidly at about 5-6 times per sec..

Otherwise, please press reset button until the blue light is fast flashing.

Reset

Plug in and keep blue 

light fast flashing

Visit at www.broadlink.com.cn by using 

your smartphone internet browser,and 

press “Download App” to download and 

install ( Android phone automatically 

download and install, iOS phone will skip 

to AppStore).

e-Control

Scan the QR code from packing box or 

user manual to download and install the 

APP.
Download the free BroadLink App from 

the Apple App store or Google Play 

Store by searching for “e-Control” or 

“BroadLink”. 

A:

B:

C:

Smart Phone

The Wi-Fi light is flashing quickly

If the Wi-Fi light is flashing quickly, it means that the BroadLink device is in the original factory 

state. 

It is ready for you to start configuring it. 

The Wi-Fi light is flashing slowly

If the Wi-Fi light flashes slowly for 4 flashes and then stops flashing for 1 sec. and then repeats 

this cycle, it means the BroadLink device is waiting for you to configure it. Please press at the 

upper right icon to start the configuration.

The Wi-Fi light is flashing very slowly

If the Wi-Fi Light is flashing 1 time every 3 sec. indicates that the device has not connected to 

the Wi-Fi.Check your Wi-Fi is running .

The Wi-Fi light is flashing slowly and continuously

If the Wi-Fi light keeps on flashing continuously at 1 flash per sec., it means the configuration 

has failed, please reset the device and configure again.

Only connect to your home Wi-Fi, and then can find your device. Once this is done you can 

lock your device at “Device Info” page.

Please refer to User Manual in BroadLink APP for detail.

1-Year Limited Warranty.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 

Changes or modifications not expressly approved by the party responsible for compliance could void the user's 

authority to operate the equipment.

This device may not cause harmful interference, and

This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This 

equipment should be installed and operated with minimum distance 20cm between the radiator& your body.  

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.