Procom Products Inc. D502P 사용자 설명서

1 Getting Started

1.1 Getting to know your touch phone

1.2 Installing the SIM card, battery, and storage card

You need to remove the back cover before you can install the SIM card and

battery. Also, make sure to always turn off the power before installing or

replacing the SIM card and battery.

To remove the back cover

1. Make sure your device is turned off.

2. Firmly hold the device with both hands and the front panel facing down.

3. Push the back cover up with your thumbs until it disengages from the device

and then slide it up to remove.

To install the SIM card

The SIM card contains your phone number, service details, and phonebook/

message memory. Your device is supported both 2G and 3G (WCDMA) SIM

cards.

1. Remove the battery if it is installed.

2. Locate the SIM card slot, and then insert the SIM card with its gold contacts

facing down and its cut-off corner facing out the card slot.

3. Slide the SIM card completely into the slot.

Note: • The phone can be supported the double SIM cards. The card slot

1/2 will be both supported 3G SIM card (WCDMA), but one SIM card can

use 3G networks only.

If you need to use 3G operation, please insert 3G card in the card slot

1(Default SIM1 card, defined in the menu Settings/More…/Mobile

networks/3G service), the SIM2 card will be supported 2G network only (If

insert 3G card in the card slot 2, you can also use 2G operation only).

• Some legacy SIM cards may not function with your device. You should

consult with your service provider for a replacement SIM card. There may

be fees for this service.

To install the battery

Your device comes with a rechargeable Lithium-ion battery and is designed to