Unique Broadband Systems Ltd. DRU1KW 사용자 설명서
Chapter
6
Maintenance
6
Maintenance
6.1
Introduction
This section describes the procedures for removal and replacement of the DRU-1k
components/sub-assemblies.
6.2
Test Equipment
The only test equipment required to perform the replacement procedures in the manual is a
PC/laptop. Operating instructions for test equipment are not included in this manual.
6.3
Required Tools
The following tools may be needed to perform maintenance on the repeater:
Table 6-1 Required Tools
Tool
Type
Size
Screwdriver Phillips
#3
Screwdriver Phillips
#2
Screwdriver Phillips
#0
Screwdriver Slotted
1/4”
Screwdriver Slotted
3/16”
Screwdriver Slotted
1/8”
Screwdriver Slotted
3/32”
Hex Driver
3/16”
Hex Driver
5/32”
Hex Driver
9/64”
Security Hex Driver
3/16”
Open End Wrench
7/16”
Open End Wrench
11/32”
Open End Wrench
5/16”
Torque Wrench
5/16”
Socket
7/16”
Cable Tie
PLT.7M-M
18lb, 3.1" x 0.090"
Cable Tie Mount
ABM1M-A-C
Step Ladder
SX03-20000-01-M01 6-1